Pellet stove CALVOR FREYA BLACK 14.3 kW with warm air outlets to other rooms

CALVOR FREYAis powerful14.3 kW pellet stove, which is intended not only for heating the room in which it is installed. The back of the stove is2 additional warm air outlets, which can be used to vent warm air to other rooms.

This makes FREYA particularly suitable for homes where a single pellet stove needs to distribute heat more efficiently between multiple rooms.

Wi-Fi control:Built-in Wi-Fi connection for convenient remote control of the pellet stove.

2 ADDITIONAL WARM AIR OUTLETS

One of the mainCALVOR FREYAthe advantages aretwo additional warm air outlets at the back of the oven.

By adding appropriate air ducts, some of the warm air produced by the furnace can be directed tonext to the premises, rather than concentrating all the heat only in the room where the stove itself is located.

This allows for a more practical distribution of warm air in the house and the use of one stove to heat multiple rooms.

POWERFUL HEATING UP TO 150 m²

CALVOR FREYA's rated heat output reaches14,3 kW, while in partial load mode – 7.2kW.

The heated area specified by the manufacturer is up to150 m², however, the actual heated area depends on the building's thermal insulation, room layout, ceiling height, outdoor temperature and other conditions.

Nominal heat output: 14,3 kW
Heat output at partial load: 7,2 kW
Heated area:up to 150 m²

25 KG PELLETS TANK

Capacious25 kg pellet tankensures long-term operation of the stove without the need to frequently refill pellets.

Depending on the operating capacity, one refill provides approximately8-16 hours of operation.

Pellet tank capacity: 25 kg
Operating hours:approximately 8–16 hours
Suitable pellets: Ø6 × 25 mm

HEAT WHERE IT'S NEEDED

A traditional pellet stove mainly heats the room it is installed in. FREYA's additional warm air outlets allow for a more practical distribution of heat.

For example, a stove can be installed in a living area, but some of the warm air can be directed through air ducts to an adjacent bedroom, hallway, or other room.

2 additional warm air outlets at the rearis one of the most significant advantages of FREYA compared to standard pellet stoves.

TECHNICAL SPECIFICATION

Brand: CALVOR
Model: FREYA
Tips:pellet stove with additional warm air outlets
Nominal heat output: 14,3 kW
Heat output at partial load: 7,2 kW
Heated area:up to 150 m²
Pellet tank capacity: 25 kg
Operating time on one charge:approximately 8–16 hours
Granule size: Ø6 × 25 mm
CO emissions: 95 / 170 mg/Nm³
Additional warm air outlet:2 outlets at the back of the oven
Air intake: Ø48 mm
Flue gas outlet: Ø80 mm
Power supply: 230 V / 50 Hz
Dimensions (W × D × H): 542 × 654 × 1118 mm
Package dimensions: 592 × 704 × 1248 mm
Net/Gross Weight: 140 / 152 kg

CALVOR FREYA – ONE STOVE, HEAT FOR MULTIPLE ROOMS

14.3 kW heat output, 25 kg pellet tank, heated area up to 150 m² and 2 additional warm air outlets to other rooms– FREYA is suitable for those who want not only a powerful pellet stove, but also the ability to distribute heat more efficiently throughout the house.